Quickly get to work flaring brake lines or other 3/16 inch hard lines with our Hard Line Tool Kit. This includsive kit has our tubing straightener to start your tubing on the straight and narrow. We have included our SAE double flare 45- brake flaring tool and a 37- AN flaring tool so you get f for both fitting types. In the kit we have our Lever Tubing Bender to aim your tubing in exaclty the direction you need it to go, and we have our tubing cutter to it to the correct length for your project. To round out the kit we've added the P-51 Sure Lapping Tool to allow you to lap-in flared tubing to elimate leaks in you hard line joints.
The Hard Line Tool Kit works with OE , , aluminum, or copper tubing for brake systems, fuel systems, and more.
45-Deg Brake Flare Tool turret-style design allows you to make those f in minimal time
Lever type tubing bender features a 10" that gives plenty of leverage to make , , 5/8" radius bends
37-Deg Flaring Tool feed screw requires less motion and effort than , provides , uniform f with minimum effort
P-51 Sure Lapping Tool removes irregularities in the flare and hones it to a perfect angle to enable the tube to with the fitting
Hard Line Tool Kit Contents
3/16 Inch Tubing Straightener
Lever Tube Bender, 3/16 Inch
37- Flaring Tool
45- Brake Line Flaring Tool
P-51 Sure Lapping Tool, 37 & 45 F
1/8" to 1-1/8" Tubing Cutter
How to use the Tubing Straightener:
Step One - Roll out short length of hard line from roll
Step Two - Insert hard line into and then through the internal that are inside the tool
Step Three - Pull/Push the hard line through the tool and over the length of the hard line. This will straighten the hard line by removing any bends or curvature from the line.