Gulfcoat IN12622-A Marineblue Anti Corrosion spray Protection Coating Aerosol 12oz corrosion preventative inhibitor formulated to improve adhesion, moisture resistance, UV protection Modine
Use: Developed in response to customer demand for a protective coating to be applied on small jobs and or in remote areas. Original Designed for HVAC Coil, can be applied to any surface
Corrosion Resistance: Products have a robust synthetic multi-polymer resin backbone that is suitable for most environments and will maintain its appearance after many years exposure to the elements
UV Degradation: Built in enhanced UV inhibitors form a protective barrier throughout the paint film. As a result, UV degradation of individual polymer molecules are reduced and the film integrity maintained
Gloss Retention: A high gloss finish is applied that is smooth, limits dirt and debris buildup, and allows for easy equipment cleaning
Resistance: Corrosion durability shall be confirmed through testing to no less than 5,000 hours salt spray resistance per DIN 53167 (ASTM B117-11) using aluminum test coupons
Volume : 0.034608373 FTQ
Weight : 1.5 LBR
Model : IN12622-A
UPC-EAN : 850021531003
Spray Applied Corrosion Resistant Coating
GulfCoat marine coatings provide a HVAC COIL coating system for added corrosion protection on aluminum and copper finned RTPF and MCHX coils. GulfCoat coatings help to reduce the accelerated corrosion of HVAC coils. By following the coating and maintenance instructions, end users should expect extended life cycles and keep the energy consumption to a nominal level.
Directions
Surface must be free of grease, rust, and wax. Prior to coating, follow these steps:
Clean coils with appropriate cleaner use GulfCoat Surface Prep
Rinse with clean water
Allow coil to thoroughly dry
Mask off or protect areas from overspray
Allow product can to warm to room temperature
Mask off or protect a