Actuator
Description
Actuator ACD175-12V/24V
The 175 SERIES electric actuator is designed to mount directly on a "P"size fuel injection pump, with a right hand, rack, in place of the mechanical govemnor. When the 175 actuator is installed on the fuel pump, an optimum performance, long life fuel control system results. An external fuel shut off lever 1s provided to manually the actuator s control. Also provided is an adjustable intermnal maximum fuel limit.
The 175 Series Electric Actuator can control fuel pumps of up to 8 cylinders. The actuator was designed with two isolated chambers. The upper chamber is wet with oil and contains the connection to the fuel rack and an optional manual shut off mechanism. The sealed lower chamber contains the electromagnetic components.
This design eliminates the possibility of magnetic particles or other oil contaminants interfering with the operation of the actuator. Unreliable devices 1 as bellows and sliding seals are not used so that no maintenance is required. The designed life of the electric actuator is typically longer than that of the engine.
Operating Voltage:
12 or 24V DC
Nominal Operating Current:
12V DC version:
4.0A
24V DC version:
2.0A
Maximum Current:
12V DC version:
5.8A
24V DC version:
3.1A
ENVIRONMENTAL
Operating Temperature:
-40 to +120°C (-40 to +200 °F)
Relative Humidity:
up to 100%
Vibration:
20g, 20-500 Hz
Shock:
20g @ 11 msec.
PHYSICAL
Weight:
4.75 lb. (2.2kg.)
Mounting:
Requires camshaft bearing retainer kit
P3000pump
KT275
P7000 pump
KT276
Mating Connector:
EC1300
Mating Cable Harness:
CH1215