1. The tire pressure sensor of the 2012 can only be read with certain diagnostic tools.
2. Before the tire pressure monitoring function normally, the ID information of the body control device records each position in the tire pressure sensor.
3. You can help you program all much easier tires with only 3 steps.
4. The activation tool for tire pressure monitoring sensors is simple, fast and user friendly.
5. The compact design makes it easy and laptop, easy to use.

Technical data:
Condition: New
Article type: Pneumatic pressure reset tool
Color: as the image shows
Battery: 9 numbers battery (not included in the scope of delivery)
Hardware version: OEC-T5
Software version: El-50448
Tension: 9v
Equipment:
Suitable for Universal Car
Application method:
Step 1: Change to inclination mode
Place the gear lever in "P"
Place the ignition switch "ON"
Enter the tire pressure screen interface from Dec
Dec shows "press the set/ctrl to learn again"
Press "set/ctrl"
The indicator lights up for 3 seconds and the horn sounds twice to enter learning mode
Step 2: Read information about the tire pressure sensor
Start at the left front wheel,
Make J-46079 or diagnose the tool antenna
50448 is in the position of the core of the valve and near the edge of the lateral wall of the tire.
The EL-50448 tire pressure tool begins with the start switch.
The tire pressure sensor information could be read successfully when the horn sounds once.
Step 3: The same method to read other tire pressure information.
The previous instructions to read the tire pressure in the right front, in the back to the right and back to the left.
Blinker shines for 3 seconds and the horn emits twice when the learning process is complete.

Packaging list:
1 to restore tire pressure

A notice:
Neither the charger nor the battery are included in the scope of the delivery.