Minimizes friction and wear, gear lubrication will be maintained even at temperatures below zero and the lubricating film will remain between the teeth of the pinions even when they work under high pressure and revolutions. Well lubricated transmissions and differentials will allow the full power of the engine to be used while the vehicle is traveling at different speeds. METAL LUBE guarantees the best response of transmissions, differentials, gears, reducers and other transmission organs. It facilitates shifting to allow a fast and precise synchronization. Reduces the resistance of the oil to the movement of the gears. It improves operation at cold temperatures and maintains the stable viscosity of the lubricant in hot conditions. METAL LUBE treatment is able to withstand high loads and extreme shear stresses. It reduces the excess temperature generated by friction, it cools the mechanisms, taking into account that in these types of equipment, the crankcase can be compact, with very little oil capacity and there is no cooling circuit. By maintaining an adequate temperature in the oil, it is possible to avoid its oxidation and premature depletion of the additives that make it up, so that the oil will maintain its properties for much longer. With this formulation abrasive, adhesive, corrosive and friction wear is avoided. METAL LUBE anti-friction treatment, is able to improve the lubricity of any oil by more than 500%. Its powerful antifriction action reduces noise and vibrations.