Mosaic Glue, Mosaic Tiles, Mosaic Grout
How to use:
Clean the wall/floor before use to ensure there is no oil, dust or loose particles.
I.Paste mosaic (using mosaic glue)
1. Apply glue: Apply the glue evenly on the base surface (thickness is about 2-5mm)
2. Press the mosaic onto the glue and twist it slightly to ensure glue penetration.
3. Tap the surface with a scraper to remove bubbles and ensure that each mosaic is in full contact with the glue.
4. Pay attention to leaving gaps (usually 1-3mm).
5. Let it stand for more than 24 hours until the glue is completely cured (avoid touching during this period).
II. Filling (using mosaic grout)
1. Pour two-thirds of the grout first, add water in small amounts and multiple times, mix the grout with water, stir until it is toothpaste-like (no lumps) and use it directly.
2. Use a scraper to press the grout obliquely into the gap to ensure that it is filled without voids.
3. Scrape off excess caulking agent on the surface (level with the mosaic surface).
III. Curing
1. Initial setting stage (about 20-30 minutes): Use a wet sponge to gently rub the surface in a circular motion to expose the mosaic edge.
2. It takes 24-48 hours for the caulking agent to fully cure. Avoid getting it wet or rubbing it during this period.
3. Before fully curing (about 1-2 hours): Use a dry cloth to polish the residual powder on the surface.
IV. Post-maintenance
1. Sealing treatment
2. For humid areas (such as bathrooms), apply a transparent waterproof sealant.
V. Note
1. The recommended construction temperature is 5-35℃, and outdoor work should be avoided on rainy days.
2. Tool preparation: toothed scraper, rubber scraper, sponge, cleaning cloth, etc.
3. Mosaic tile grout may irritate the skin, so gloves must be worn.