Description:

Key Features:
Labor Saving Design: The reduction gear ratio of 3:1 allows the rollers to make one complete turn for every three turns of the rolling mill handle and also the pinion drives the oversized gear, which both can relieve the amount of force needed to operate the rolling mill.
Safe to Use: The gear covers are made of high-quality A3 steel on both sides of the machine and are designed to protect you from hidden danger under standard operation.
Low Noise: Double-sided gears are designed to have a good noise-reduction effect and create a quiet working environment for you.

Specification:
Color: Green
Material: Cast Iron, 55HRC Steel, A3 Steel, ABS
Treatment: Spray Paint, Heat Treatment Process
Assembly Required: Yes
Gear Ratio: 3:1
Thickest Compressibility: 18mm/0.7inch
Thinnest Compressibility: 0.01mm/0.0004inch
Upper Roller Length: 9cm/3.54inch
Middle Roller Length: 5cm/1.96inch
Square Grooves Width: 4cm/1.57inch
Semicircle Grooves Width: 4.5m/1.77inch
Roller Total Length: 12cm/4.7inch
Roller Diameter: 5cm/1.96inch
Space of Two Rollers: 0-25mm/0-0.7inch
Square Wire: 1/2/2.5/3/3.5/4/5mm
Semicircle Wire: 2/3/4/5/6/9mm
Maximum Sheet Width: 45mm/1.8inch
Hand Crank Length: 29cm/11.4inch
Gross Weight: 18.35kg/40.5lbs
Net Weight: 17.55kg/38.7lbs
Product Size: 24.5*24*26cm/9.6*9.4*10.2inch
Package Size: 35*29*30cm/13.7*11.4*11.8inch

Package Included:
1*Rolling Mill Machine
1*English Manual
All Accessories for Assembly

Notes:
1.Screws are not included in the package.
2.When using this machine, please add lubricating oil into the injection holes once or twice a day.
3.Please peel away the plastic wrap on the rollers before using.
4.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.