Are you already a super rc crawler pilot? Well, it's time to evolve your car to overcome the most demanding and extreme challenges. We present the first rc crawler settings and adjustment table on the market, calculate the measurements and angles of your radio control car to see the capabilities and track in detail the evolution of each of the settings and accessories you install, at the time making the comparison with other cars in a precise, professional and equal conditions. With the “RC CRAWLER SET-UP SYSTEM” table you will be able to accurately measure the following properties of your 1/24 and 1/18 scale rc crawler car: Maximum front and rear suspension travel on both sides, both in extension and compression. Front attack angle. Rear departure angle. Wheelbase distance between axles. Width distance between axles. Tire width. Maximum inclination limit angle of overturning in lateral passage. Maximum inclination limit angle of vertical tipping uphill. Maximum inclination limit angle of vertical overturning in descent. Free height of the differentials. Central ventral free height. Weight distribution in front vs back. Weight distribution on the left side vs right side. Wheel center height and its total diameter. You will enjoy assembling the obstacles made of 100% high-quality wood, from the beginning. You will receive a board with the pre-cut pieces, and you will only have to press slightly to remove them and carry on with the easy 3D assembly pieces, it's not necessary to use adhesives or glues. Check the assembly instructions by scanning the QR code printed on the board. Remember to share the measurements of your rc crawler on social networks with the @toyswd tag.