All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Powerful ESP32-S3R8 Chip--- Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna.
AMOLED Touch Display--- 2.41inch AMOLED Touch Screen, QSPI interface, 600 x 450 resolution, 16.7M color. Supports capacitive touch function, controlled via I2C interface, with interrupt support. Delivers more vibrant colors, finer details, and more lifelike videos and images
Rich peripheral and Expandability--- such as QMI8658 6-axis IMU (for motion gesture detection/step counting,etc. ), PCF85063 RTC chip, TF card slot, Lithium battery header, etc., while also providing USB, UART, I2C and 34PIN GPIO header
Connectors--- 3.7V MX1.25 battery recharge/discharge header. USB Type-C port for power supply/program downloading/debugging. UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability
Memory & Storage---Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
Comes with Online Tutorial Usage Guide and Online Development Resource, Please check: n9.cl/8xoelh
RP2350-Zero Mini Development Board, RP2350 MCU Board Based On RPi Dual-Core&Dual-Architecture Chip, Onboard USB Type-C Connector, 29xMulti-Function GPIO Pins, with Pre-Soldered Header
KWD 5.500
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, 2MB of Onboard Flash Memory, Adapting USB Type-C Port via Adapter Board, Includes USB Port Adapter and FPC Cable
KWD 3.500
RP2350 1.47inch Display Development Board, 172x320, 262K Color, Based On RP2350 Dual-Core & Dual-Architecture Microcontroller, with Colorful RGB LED, Type-C USB Port
KWD 7.500
3.52inch E-Paper Display Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Jetson Nano/STM32, 360x240 Pixel E-Ink Display, Red/Black/White, SPI Interface with Driver Board
KWD 11.500
