All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
128 x 64 Pixel: Needn't backlight, these OLED module can self-luminous. It has super high contrast, bright and crisp dots, viewing angle is greater than 160 degree, even tiny fonts quite readable
No Embedded Fonts: There are no embedded fonts inside these Arduino display module, you can create the fonts through font generation software
Changeable IIC Address: Solder the resistor to the 0x7B side on the back and disconnect the 0x7A side, then the 0x7B slave device address will be selected (default); Solder the resistor on the 0x7A side and disconnect the 0x7B side, then the 0x7A slave device address will be selected; when switches the IIC slave address of the hardware, the software should be modified accordingly
Application: These OLED display can be used for Arduino, Raspberry Pi 5/4B/3B+/3B/2B/Zero, STM32, C51, MSP430, ESP32 development board and so on. Showing graphical & textual information directly of your machines
Parameters: Screen Size: 1.3-inch; Driver Chip: SSD1106; Resolution: 128*64; Color: White; Viewing Angle: greater than 160 degree; Power Consumption: 0.06W; Voltage: 3.3V or 5V DC; Working Temperature: -20 degree Celsius - 60 degree Celsius
PCIe to M.2 NVM Express with PoE Hat Expansion Board with Official Pi 5 Active Cooler Multi-Specification SSD Interface Hard Drive for Raspberry Pi 5, Support 2230/2242/2260/2280
KWD 14
2pcs Pre-Soldered Nano V3.0 Board with Expansion Board and Type-C Cable + Electronics Basic Starter Kit for Arduino
KWD 11
3pcs Pro Mini ATmega328P 3.3V 8MHz Development Board Microcontroller Compatible with Arduino IDE (Pre-Soldered)
KWD 6
MEGA R3 Board ATmega 2560 with USB Cable, MEGA 2560 R3 Development Board Compatible with Arduino - Improved Version
KWD 9
