1. A set of wire screws is placed in a Screw/Fastener opening of the workpiece, such as aluminum alloy, creating a standard internal wire with high strength, wear resistance and Precision Machined.
2. In the event of an error in threading or repairing a damaged internal threaded hole, the threaded hole can be financially and effectively repaired with a threaded airline. The same screws can also be used after repair.
3. This applies to high voltage switches, microwave communication, car parts, air space devices, heater, etc. Repair of parts with a threaded hole, such as repairing the threaded hole on the injection machine. Imported equipment or mechanical thread is damaged and should be changed to wire etc. due to the supply of spare parts.
4. The use of screwed-up sleeves from wire to convert threaded holes etc. --- inches is comfortable and fast.
5. With a box and a sponge for good protection and safe transport.

Specification:
Article type: Threaded sleeve
Material: Stainless steel
Threaded bet size: M12x1.5 Length: 2D

Parcel List:
1 x spiral drill
1 x thread
1 x key
1 x tools to break Dowels
1 x key
12 x Insert for repair of threads

Attention:
Instructions
Boreholes with a matching drill.
Use the special) thread, the wire depth must exceed the mounting length of the wire screw sleeve. Place the wire screw on the mounting button with the tip directed. Turn the key handle to screw the wire screw into a threaded hole.
Use the tool to break the pins to level the mounting holder (tail) with a hammer to hit the punch tool and the rear handle can be removed.
When there is a problem with the installation of a threaded screw sleeve (eg Jumper), the threaded sleeve can be removed using the wire wire tool.