0.96 inch OLED display with a resolution of 128 x 64 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.08W when the screen is fully lit.
The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports.
SSD1306 OLED display module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module, users can create fonts using font generation software.
The module pins are soldered and housed in a small box to prevent them from falling off during transportation. The OLED glass surface is covered with a removable transparent scratch-resistant film.
A61L-0001-0093 9 Inch LCD Monitor Screen Assembly Compatible with Fanuc CNC System CRT Replace D9MM-11A MDT947B-2B 24V
KWD 90.500
1.47inch LCD Display Module with Touch Panel, Micro LCD Display, 172x320 Resolution, IPS, SPI and I2C Communication, 262K Display Color, Compatible with Raspberry Pi, ESP32 S3, Pico, etc.
KWD 8
4" 4 inch 720x720 300nit IPS MIPI LCD Round Touch Screen and Controller Board 31 pins
KWD 39
4.3inch DSI LCD Compatible with Raspberry Pi 5/4B/3B+/3B//3A+/2B/B+/A+/CM5/4/3+/3, 800x480 Resolution, 5-Points Capacitive Touch Screen IPS Display Monitor, MIPI DSI Interface
KWD 17.500
