Search

PrimoChill Complete 16mm PETG Kit

KWD 39.500

Brand
PrimoChill
Category
Fans & Cooling
Weight
2.3 kg
1 +

Special Features

  • All in One Kit Designed/Tested to Work Together with Zero Issues
  • Superior Strength to Acrylic Tubing
  • Environmentally Responsible, Safe, and Non Toxic Product
  • Thicker Wall for Safer Operation
  • Trusted/Experienced Brand. PrimoChill

Description

PrimoChill is making PETG even easier to work with. Using our complete kit you have the PETG required for any system and the tools to work with it. The Universal Tube Cutter is provided to rough cut your PETG to length, while the RFB finishing drill bit can be used to fine tune your length and gives a perfectly finished tubing end. The combination of Tube Lube and bending insert are included to use in conjunction with the provided 45/90/180 Degree Water Cooling Bending Set. This combo allows you to creates bends of any angle with precision using the heat gun of your choice. PETG Specifications Inner Diameter: 12mm Outer Diameter: 16mm Wall Thickness : 2mm Length: 30in. Compatibility Fittings: 16mm OD Rigid Fittings Parts Included 6 x 30 inch PETG tube 16mm OD 45/90/180 Degree Bending Set 16mm OD RFB Finishing Drill Bit 12mm Bending Insert Tube Lube Tube Cutter Warnings With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. Not responsible for any damage caused by or when using this product. Please use at your own risk. Installation PLEASE NOTE:A bending insert is meant to have a tight fit. Otherwise, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience and practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. 1. Stretch the bending insert. Remove any excess that isn't stretched. 2. Ream the rigid tube with the RFB to ensure a clean opening for easier insertion. 3. Apply several drops of Tube Lube on the bending insert itself and then place several more drops into the rigid tube. 4. Work the bending insert into the rigid tube.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}