Programming Function 1. To enter programming mode, press and hold the M programming button for 2 seconds. The left and right 3D aperture lights will flash slowly, signaling that the controller is now in programming mode. 2. Select any button you wish to program (map) from the following options: A/B/X/Y/LB/RB/L3/R3/D-PAD. The left and right 3D aperture lights will then flash rapidly. 3. Press either the left or right programmable key. The left and right 3D aperture lights will transition from rapid flashing to a steady illumination, indicating that the button programming (mapping) was successful. Note: A maximum of 16 buttons can be programmed. If no button is pressed for over 1 minute, the programming mode will automatically exit. Clearing the Programming (Mapping) Function: 1. To initiate the clearing process, press and hold the M programming button for 2 seconds. The left and right 3D aperture lights will flash slowly, indicating that the controller has entered programming mode. 2. Press the programming key you wish to clear for ML and MR. The left and right 3D aperture lights will flash and then remain illuminated, indicating that all programming (mapping) functions have been successfully cleared.