The VESA Mounting Bracket is a newly redesigned metal bracket designed to hold your PIN Pad next to your 15" or 17" monitor. Make your in-store card purchases more stable and secure with this mounting bracket. the redesign is a lighter, thinner bracket to protect your payment device This mounting bracket raises your PIN Pad off of the counter and secures it next to your POS monitor. The bracket is ideal for server and bar POS stations and makes for more stable and smooth transaction by lifting your PIN Pad closer to the monitor. The PIN Pad is attached to the black bracket and the bracket is mounted onto the monitor. The bracket cradle for the PIN Pad comes with three sets of screw holes to raise or lower the height of the PIN Pad. The mount can be used on the left or right side of the 15" or 17" monitor. The bracket is also available in a 19" or 23" mount. The VESA mounting bracket is easily installed. The bracket comes with all necessary mounting screws, so the only tools needed are a regular-sized and small screwdriver. The POS mount on the bracket has holes for 70mm and 100mm VESA mounts, which are the 4 screw holes that come standard on the back of a monitor. The bracket includes three sets of four screws for mounting. The set of screws you use will depend on the thickness of your monitor stand. If no monitor stand is being used, you will most likely use the small set of screws. The small set of screws is M4 x 10mm screws, the medium set is M4 x 14mm screws, and the large set is M4 x 18mm screws. Custom mounts are already produced for these PIN Pads: Ingenico Lane/3000/5000/7000/8000, IPP310, IPP315, IPP320, IPP350, First Data RP10, Verifone Vx805, Vx820 and PAX A35, S300 devices. PIN Pad not included.