All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Continuous Power Supply: A dummy battery allows you to use the D-TAP plug-in to continuously power your camera from an external power supply. This means that you don't have to worry about changing the battery or the battery overheating and losing power because of recording for a longer time. However, it is necessary to pay attention to the fact that the dummy battery lasts for about 4 hours at a time, and then it will remind you that the battery level is too low, which is normal. You can restore the dummy battery to full charge by unplugging and restarting it.
Wide Compatibility: This dummy battery replaces for Sony NP-FZ100 and works for for Sony Alpha A7 III, A7 IV, A7S III, A7R III, A7R IV, A7R V, A7C, A7C II, A7CR, A1, A9, A9 II, A6600, A6700, FX3, FX30, ZV-E1, ZV-E10 II cameras.
Works Well With V Mount Battery: This dummy battery works well with most of V mount battery on the market with the D-TAP output. And we recommend using it with SmallRig V mount battery. SmallRig V mount battery has over-current and over-voltage protection, so don't worry about damaging your camera.
No Warning: Fully decoded battery, you don't have to worry about the warning pop-up that the battery will damage the camera, same size as the original camera battery, so there is no need to worry about it getting stuck.
Safe & Reliable: Overvoltage, overheating, and overcharge short-circuit protection alongside fire-resistant PVC and ABS make this item safe and reliable.
How to Use: ①Connect the dummy battery to V mount battery; ②Insert the powered dummy battery into the camera battery compartment correctly; ③Close the battery compartment cover. Please follow the installation steps when using. If the camera battery compartment is not closed, the dummy battery will not work normally.