Ubec voltage converter to create 5v ouput voltage from 4-6s battery pack input voltage. The ubec is ideal to provide fpv cameras and other brushless gimbals with a constant 5V voltage.
All epoxy sealed containers with waterproof housing; non-isolated.
With overload / over-current / over / low voltage protection, stable performance.
Light compact, convenient to use and transport; auto recovery.

Suitable for: RC Air Plane
Output current: constant 3A
Output voltage: 5V(5V version).
Size:25*20*7mm
Net Weight: 6g
Weight: 16g

Package Included:

2 X 5V FPV UBEC

Cable Length means the distance from pins to pins ,not contain the plugs housing.please allow 1-2cm measurements error.
Total 3Pcs.These are 1 Male to 2 Female Y Harness Cable,1 Female to 2 Male Y Harness Cable,1 Female to 2 Female Y Harness Cable.
Compatible with Traxxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI 1/10 RC car,also can be used on most mini RC helicopter and indoor 3D plane for small Lipo and NiMh connection.
The 1 JST Male to 2 JST Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch;
The Female to Female Y Harness are used for TRX-4 ESC,it allows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time.
Some led lights and winch has the female JST connector,so the 1 JST Female to 2 JST Male Y Harness may helps.

Material: 20AWG Silicone
Cable length: 15cm/5.9inch
Color: Black & Red

Package Includes:(3PCS)
1 JST Male to 2 JST Female Y Splitter Cable x 1
1 JST Female to 2 Female Y Splitter Cable x 1
1 JST Female to 2 Male Y Splitter Cable x 1