Search

Search

ESP32-S3 Development Board, ESP32 Mini Module 3.3～6V 160 MHz with WiFi & Bluetooth 5.0 Function - 3PCS

KWD 8.500
Brand
YELUFT
Weight
31 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • ESP32-S3 Development Board: ESP32S3 SuperMini is an IoT mini development board based on the ESP32-S3 WiFi/Bluetooth dual-mode chip. ESP32-S3 is a 32-bit RISC-V CPU with an FPU (floating point unit) that can perform 32-bit single-precision operations and has powerful computing power. It has excellent RF performance and supports IEEE 802.11 b/g/n WiFi and Bluetooth 5 (LE) protocols
  • High-performance RISC-V processor: Equipped with ESP32-S3 chip, equipped with 32-bit RISC-V single-core processor (160MHz) and floating-point unit (FPU), it supports complex computing tasks and is suitable for high-real-time IoT scenarios. Based on the above features, ESP32S3 SuperMini is positioned as a high-performance, low-power, and cost-effective IoT mini development board, suitable for low-power IoT applications and wireless wearable applications
  • Rich interfaces: The board comes with an external antenna to enhance the signal strength of wireless applications. It also has a small and exquisite appearance combined with a single-sided surface mount design. It is equipped with rich interfaces, with 11 digital I/Os that can be used as PWM pins and 4 analog I/Os that can be used as ADC pins. It supports four serial interfaces such as UART, I2C and SPI. There is also a small reset button and a bootloader mode button on the board
  • External power supply: If external power supply is needed, just connect the + terminal of the external power supply to the B+ position on the back of the board, and the negative terminal to the B- on the back. (Supports 3.3~6V power supply). The battery can be charged via USB. Note: Be careful not to short-circuit the positive and negative poles during welding, which may burn the battery and equipment
  • External power supply: If external power supply is needed, just connect the + terminal of the external power supply to the B+ position on the back of the board, and the negative terminal to the B- on the back. (Supports 3.3~6V power supply). The battery can be charged via USB. Note: Be careful not to short-circuit the positive and negative poles during welding, which may burn the battery and equipment

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}