Alfa APA-L2410 is a low profile directional antenna with N-female connector. It fits many popular outdoor Wi-Fi products including the Alfa Camp Pro Kit 2 Tube receiver, as well as the Ubiquit Bullet. Advantages/disadvantages of directional antennas: A directional antenna such as this one concentrates all of its gain in one direction. This results in longer distance reception in that particular direction. But it also means limited reception to signals coming from other directions since the horizontal path is very small. We recommend this directional antenna for environments where you know the location of the Wi-Fi signal and it is close to an open line of sight. If you are in areas of heavy obstacle coverage, there will not be any improvement over the stock omni directional antenna that comes in the Camp Pro 2 kit. Installation is easy- power off your WiFi device and remove its current antenna. Affix the Alfa APA-L2410 to the N-connector on your hardware and seal off the connector area with waterproof tape (not included) if the setup will be exposed to moisture.

This is a perfect addition to your Alfa Wi-Fi Camp Pro 2 extender kit. If you are attempting to increase signal strength over long open distance, this directional antenna may perform better than the omni directional antenna that comes in the kit. It attaches directly to the Alfa Tube-U(N) in the Camp Pro 2 kit and does not need separate mounting. Note that every environment is different and in many cases, an omni antenna will be more ideal than a directional. Therefore we suggest you view this antenna as an extra tool that may benefit you in some environments (most places of longer open distance) and not view it as an "upgrade" and expect it to boost signal in all environments. You will need to seal the connection with waterproof tape as you would with any antenna connection. This antenna is not manufactured by Alfa but is designed to work well with this equipment.