3-Lead Acc Hardwire Kit with Battery Voltage Display for Dash cam,Adjustable Low Voltage Shut Off (11.6V, 11.9V,12.2V and 12.5V),Work for Most Dash cams with a Parking Mode,Output 5V/3A
Adjustable battery discharge cut-off,provide four(11.6V , 11.9V , 12.2V , 12.5V) low voltage point options.the dash cam hardwire kit will automatically detect battery voltage and provide protection. When low voltage point set is reached, hardwire kit will automatically cut off dash camera power supply after 5 minutes,prevent excessive discharge of battery ensure vehicle start normally,friendly to old battery in winter
Simple and effective monitor the battery voltage,real-time know battery health with LED display screen, easy and friendly Note:LED screen will turn off 5 minutes after the ACC signal is cut off
Anti-Interference Magnetic Ring is included to safeguard against radio frequency interference.Note:The magnetic ring can move up and down and can be removed.When hiding cables, you can first remove the magnetic ring, and after the work is completed, you can choose to install the magnetic ring or not
3-wire hardwire kit is excellently for powering dash cam,input voltage:11.6V--36V,output voltage:5V,maximum output current:3A,90degree USB C charger head,Anti-interference magnetic ring,total length:11.5 ft
24/7 Parking Surveillance and ACC mode,the yellow wire of the dash camera hard wired kit connected to the constant power,red wire attach to the acc power,black wire attach to the ground.enabled the parking monitor function on the dash cam,after 3 seconds of shut off the vehicle, the dash camera will automatically switch to time-lapse or continuous recording mode.When the vehicle is started,the dash cam will automatically power on and start working normally
ACC on/off mode: If you just want the dash cam to work when ACC is turned on,you can also connected the red and yellow wires of the dash cam hard wired kit together to the ACC power
Clean Installation,leaves cigarette lighter socket free, the dash cam hardwire kit connect to fuse taps directly,you can hiding all the cables neately,complete tools and user-friendly instruction manual
How to use the short USB C converter cable (A/B5 to A/B8)?when dash camera in parking monitoring,the 3-wire hardwire kit use usb c port A5-B5 signal pins to powered it,but some dash cams use usb c port A8-B8 signal pins to power them in parking monitoring,Don't worry,with the short usb c conver cable,you can also power them in parking monitoring