AGS Brass Case Annealer 3.0 – for multiple calibers, with digital PWM controller (adjustable from 2.5 to 10 seconds) and interchangeable inserts, and taller than previous two versions. Three sets of inserts are included – one set is for .223 and alike cases (with .402 – 10.2 mm opening), one set is for .308 and alike cases (with .492 – 12.5 mm opening) and one set is for cases with .532 base and alike (with .543 – 13.8 mm opening). Use without inserts for .338 and alike (.622 – 15.8 mm). Torch holder accepts 1/2” diameter torches, and its adjustable for height. It also comes with sharpie holder for those who want to mark their brass (0.374″ opening). Cases are rotated on heating station with separate motor for even heat spread during the annealing process.Power charger included – 12V DC 2A - which comes with multi (US/UK/EU) wall plugs. Compact size, 6×6”, and approximately 4.3″ tall. Important – we strongly advise you to set up timing and flame every time when you anneal with Tempilaq for proper and consistent results, unless you have regulated burner/s. PWM controller comes preset for usage, there is no need to adjust it in “MENU” section. Some scratches can appear on finalized product as a result of manufacturing process, so they are normal. Instruction manual is digital, and it's QR can be found in images of the product - please read it carefully before using the annealer. What's included in the package: 1x AGS Annealer 3.0 1x Wall Charger 12V 2A with EU/US/UK interchangeable plug 1X Inserts set with .402” – 10.2 mm opening 1x Inserts set with .492” – 12.5 mm opening 1x Inserts set with .543” – 13.8 mm opening 1x Torch holder that accepts 1/2” diameter torch heads - mounted upside down on annealer housing (for transport) 1x Sharpie holder with 0.421″ opening V3 does not include catch tray/ramp.