JMT M2 KEY A/E to M.2 NVME-compatible Expansion Card WIFI Interface to M.2 SSD Converter Adapter

Product requirements:
1. The adapter card must be pcie protocol card can be used, cnvi protocol can not be used.
2.After pcie network card transfer, can only use M2 NVME-compatible hard drive, M.2 SATA protocol hard drive can not be used.

If you transfer success, please understand the following knowledge:
In¡¤tel6 generation (including 6 generation) processor loaded default BIOS recognition, you can do the system disc to start in¡¤tel4-5 generation motherboards, the use of BIOS without NVME-compatible driver, can not be identified, boot into the system can be done to identify the system, that is, on behalf of the sub-disc can be done to store, can not do the system boot disc.

3. must be tested and used without problems, you can cut the M.2 adapter PCB board, because the cut affects the secondary sales.

4. Electronic devices are compatible. It is impossible to 100% guarantee that you can use.

The adapter card is no chip, it does not affect anything.
If you can't use it, then it should be incompatible between your device and the hard drive.

Product Description:
This adapter is mainly used to convert the motherboard's m2 WiFi card interface to one that can be used by inserting a nvme-compatible hard drive.
There are many kinds of M.2 slots with the same appearance.
This adapter is only suitable for M.2 KEY-A/E slot interface.
Please check if your motherboard is M.2 KEY-A or E slot before ordering.
Generally this port is plugged into the wireless network card
(Note that the interface of CNIV can't be used).