Features:
High-Performance CNC Craftsmanship and Premium Materials: This hard drive enclosure is crafted using CNC technology, with a shell made of high-quality aluminum alloy. This not only ensures the product's durability and aesthetic appeal but also provides excellent heat dissipation capabilities. The aluminum alloy material effectively conducts heat, coupled with the built-in turbofan for active cooling, ensuring stability and longevity of the hard drive during high-load operations.
High-Speed Transfer and Extensive Compatibility: Supporting the USB3.2 GEN2X2 interface standard, with a transfer speed of up to 20Gbps, it meets users' demands for high-speed data transfer. Whether connecting to older computers or the latest high-speed devices, seamless connectivity and data transfer are achieved. Additionally, the TYPE-C power port design allows users to power the hard drive enclosure using conventional mobile phone chargers or computer chargers, greatly enhancing usability and convenience.
Flexible RAID Configuration and Data Security: Offering M.2 NVME dual bays and a choice of 4 RAID modes, users can configure based on different needs. In RAID1 mode, data is mirrored on both hard drives, ensuring no data loss even if one drive fails. Specifically, RAID1 mode can also be switched to PM mode, splitting the two hard drives into independent disks while retaining existing data, providing great flexibility for data management and recovery.
Intelligent Sleep Mode and Power Management: This hard drive enclosure features an intelligent sleep function. When no data read/write operations occur for 5 minutes, the device automatically enters sleep mode, effectively reducing power consumption and extending the hard drive's lifespan. This design not only embodies the product's commitment to energy conservation and environmental protection but also saves users on electricity costs.
Wide Applicability and User-Friendliness: Supporting multiple sizes of M.2 NVME SSDs (including 2230, 2242, 2260, 2280, etc.), users can choose the appropriate hard drive for installation based on their needs. Meanwhile, the enclosure is equipped with a clear indicator light system, where a green light remains on when the SSD is properly recognized, flashes during data read/write operations, and turns red when the SSD fails, allowing users to monitor the hard drive's status at any time. Furthermore, the simple operational interface and instructions make it easy for users to get started and enjoy a convenient data storage and transfer experience.

Specifications:
Material: Aluminium alloy
Size: 106*57*17mm / 4.17*2.24*0.67in
Color: Grey
Main Control: JMS586R
Supported Capacity: 4TB
Interface: TYPE-C
Transmission Rate: 20 Gbps (USB3.2 GEN2X2)
Hard Drive Compatibility: M.2 NVME SSD (2230, 2242, 2260, 2280)
RAID Mode: 4 (PM, R0, R1, LG)

RAID mode introduction:
PM: Port Multiplier port doubling (2 SSDs are independent disks)
R0: RAID0 High Performance Mode (Combines 2 SSDs into One Disk) – RAID0 mode in which one of the hard drives is damaged will lose all data; RAID0 capacity: The minimum disk capacity multiplied by the number of disks
R1: RAID1 data high-security mode - the same data is stored in 2 disks at the same time; One of the disks is corrupted and the data still exists on the other disk; After the damaged disk is replaced, the device automatically performs RAID1 reorganization, and the capacity of the new disk must be greater than or equal to the capacity of the original disk; Do not perform data read and write operations during reorganization. RAID1 Capacity: Displays the minimum disk capacity.
LG: LARGE Capacity Max Mode – If one of the hard drives is damaged, all data will be lost. Capacity: The total capacity of the two disks after they are added.

RAID mode setting steps:
1. Install the SSD, plug in the data cable and power cable, and the power is turned off.
2. Dial the RAID mode gear to the desired position
3. Press and hold the "RESET" button, then turn on the power switch, and release the "RESET" after hearing the "drop" sound for three seconds.
4. After the RAID setting is completed, you need to enter Disk Manager for initialization.

Note:
Switch RAID mode, data will be lost, please be cautious.
Recommendation: Before switching RAID mode, back up data.
Accidental dialing RAID mode or touching the "RESET" will not change the array configuration. The array configuration will only change if the "RESET" button is held down before turning on the power.

Package Included:
1 x SSD Case
1 x Type-C to Type-C Cable
2 x Studs
2 x Screws
1 x Screwdriver