This high-performance WiFi antenna is specifically designed for WiFi 6E, offering comprehensive tri-band support for 2.4GHz, 5GHz, and the newly opened 6GHz frequency bands, enabling seamless multi-band connectivity.
Whether used with legacy devices or the latest 6GHz-capable terminals, it delivers optimal signal strength and transmission speeds.
The 2.4GHz band features excellent wall-penetration capability, making it ideal for long-range coverage; the 5GHz band provides high-speed, stable connections with minimal interference; while the 6GHz band, newly introduced with WiFi 6E, offers wider bandwidth and lower latency, perfectly supporting high-bandwidth applications such as 8K video streaming and VR gaming.
The antenna incorporates precision-tuned radiating elements, ensuring a voltage standing wave ratio (VSWR) below 1.5 across all bands and energy conversion efficiency exceeding 90%.

Please note that this WiFi 6E antenna is not a standalone receiver and must be used with a WiFi 6E network card featuring dual RP-SMA male connectors (such as the Intel AX210). The antenna utilizes gold-plated RP-SMA interfaces with contact resistance below 0.1Ω to ensure lossless signal transmission.
Before use, please verify that your router or receiving device is equipped with an RP-SMA female jack with a standard 3.5mm center pin diameter. This interface is incompatible with common reverse SMA connectors (such as those found on DJI drone controllers) and strictly matches 50Ω impedance, potentially causing compatibility issues with 75Ω TV antenna systems.

This high-gain WiFi antenna employs an innovative coaxial dipole array design, delivering a near-perfect circular radiation pattern in the horizontal plane with less than ±2dB fluctuation.
Unlike Yagi directional antennas that require tedious angle adjustments, it provides 20% stronger signal coverage across multiple floors in office environments. The radiator, optimized through ANSYS HFSS simulations, achieves effective coverage radii of 15m (6GHz band), 25m (5GHz band), and 35m (2.4GHz band) when mounted at 2-meter height, making it particularly suitable for smart home scenarios with dispersed devices while maintaining stable connections for up to 64 client devices simultaneously.

For installation, it comes with a 1.5-meter ultra-flexible cable (with only 0.3dB/m loss at 6GHz band) for optimal signal positioning. The neodymium magnet base provides 12kg of magnetic force for secure attachment to cabinet surfaces, while included 3M VHB tape allows firm mounting on non-metallic surfaces. Featuring a scratch-resistant matte coating and silicone cushion contact surface, the base prevents device damage.
The cable entry incorporates a strain relief structure capable of withstanding 5kg of pulling force, and bundled cable clips support standard DIN rail mounting for neat wiring in industrial cabinets.