[ Detection] The satellite finder meter uses a buzzer to display for signal strength evaluation, along with a thermometer scale on the lcd display for easy reading.
[Lcd Display] Features an lcd graphic display that shows various measurement parameters, backlit with led backlighting for clear visibility in all conditions.
[Reliable Performance] This digital satellite signal finder is microprocessor controlled, ensuring reliable and accurate detection data display for satellites.
[Wide Application] With a wide range of uses, this satellite signal finder is ideal for astronomical observation, navigation, broadcasting work, and night camping.
[Sensitive Detection] The portable satellite finder is highly sensitive, capable of detecting even the weakest signals and attenuating strong signals for better readings.
Description
Spec:
Item Type: Satellite Finder meter
Material: ABS
Frequency Range: 950-2150MHz
Power Supply Voltage: 13-18V DC
Input Level Range: -40dBm-10dBm
Operating Temperature: 0-40°C
Impedance: 75 ohms
Package List:
1 x Satellite Finder Meter
1 x Manual
How To Use:
1. Turn on the satellite , the satellite finder will automatically turn on.
2. Set the antenna to the correct azimuth and elevation angles (related information should be provided with the satellite dish).
3. Adjust the knob until the signal strength shows 0% (threshold point).
4. Slowly move the antenna's azimuth and elevation angles to the signal. The higher the number, the better the signal. If the reading reaches full scale, you can adjust the 'ATT' to lower the input signal. Continue moving the antenna until you get the highest meter reading and the highest possible beeping .
5. Disconnect the wire and readings, then reconnect the LNB or LNBF with the .