Common Screen Issues:
Touchscreen registers touch erratically (or not at all), and/or has dead zones:
You'll need to align the digitizer with you bottom screen.Carefully drop the digitizer (sticky side up) into the housing. then your bottom screen on top.

Console powers on, top screen flashes, then shuts off:
I've applied the touch digitizer to the LCD and put some tape on the bottom of the screen to insulate it from your console's motherboard. This is an easy drop-in repair!

bottom screen flashes,Speakers are blown or produce distorted audio:
If there's no audio at all, you may have a bigger issue,but usually this is caused by debris being stuck in the head phone jack, or the ribbon cable to the top screen being ripped, which is easily fixed by replacing the screen.

How to Install
You'll need to transfer the colored bezel over from your old screen. Do this by pinching the adhesive on the bottom right corner of the screen and carefully pulling up;
the bezel should come up with the adhesive in a single piece. Use the top shell piece as a guide for reassembly.

NOTE!!!
All screens are tested to be functional before shipping. Defective returns are only considered for screens that have not been installed.
Please test the screen before installing. Non-working screens returned after install will not receive a refund due to the risk of damage while installing.
To test the screen before installing, plugin the top screen, bottom screen, and wifi card.
Then, hold the battery to the terminals with the logo facing outward.
The console will be able to power on.
Be mindful to have the battery oriented correctly or it will destroy the fuse on the motherboard.