JMT SD Memory Card to SATA 2.5 inch Adapter Card Serial Port 15PIN+7PIN SSD Embedded Storage Conversion Adapter Support 128GB for PC Notebook MCA277
Warm Tips: SD card is not included.
Precautions:
Ù Before using this product, please insert the SD card into the corresponding SD socket, and then connect the SATA power supply and SATA data cable to the SATA host device.
After powering on the device, the LED light blinks, indicating that the SD card data is read normally.
Ú After the first time use and SD card configuration change, you need to initialise the SD card operation and format it.
After the formatting is completed, you can perform any data operation on the SD card.
Main performance:
Ù FC1307A + JM20330 dual chip.
Ú Size: smaller than 2.5" hard drive size. Can be used in notebook.
Û Equivalent to the industrial use of flexible insertion and removal of SSD, SD as a mobile hard drive to achieve flexible data storage.
Ü HDD can be used as system boot disk or data disk after adapter.
Ý SD supports high-speed card.
Þ SD supports up to 128GB as measured so far.
ß Support SATA GEN1, GEN2, the maximum data transfer rate of 150MB / s, 300MB / s respectively.
à with the BIOS, the operating system together can support SATA, plug and play, do not need any driver to be used.
For plug and play: The BIOS, the operating system and the application program should in Good coordination.
Do not hot swap when reading or writing data to avoid data loss.
Cold plugging and unplugging is generally recommended for mobile data storage.