✅【Support Hard Disk】Suitable for all kinds of M.2 2280 SSD (single/double sided can be used) Minimum mounting height requirement: 9.6 mm, suitable for desktop computers/PS5/90% gaming laptops. Not suitable for office laptops
✅【Aluminum Alloy Heatsink】the shell do oxidation treatment, no static troubles. Double-sided clip design, no rubber band softening troubles.
✅【Double Sided Rapid Cooling】 10°C - 20°C cooling effect, the top 45 ° tilt wind guide structure more closely to the chassis air ducts, quickly take away the heat, at the same time, the bottom of the stripe line can also increase the cooling area to extend the life of the hard disk.
📢【Instructions for use】Can be based on the thickness of the hard disk to paste the silicone sheet, as long as it is put into the heatsink does not loosen. Under normal circumstances: single-sided particles of the hard disk using 1mm silicone sheet, double-sided particles of the hard disk using 0.5mm silicone sheet. If your single-sided particles are thin, you can put one piece ( 1mm+0.5mm) on the top and bottom
📢 If you have any questions about our m.2 2280 nvme heatsinks, please feel free to contact us, our service team will be ready to answer or solve your questions!
M.2 Heatsink SSD Cooler, Double Layer Graphene & Copper M.2 NVMe Heatsink for 2280 M.2 SSD Laptop, for SSD Cooler
KWD 3.500
Peltier Module TEC1-12706,Aideepen 12V 6A 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module Peltier Cooler 40x40MM Compatible with Peltier Fan/Cold Plate 2PCS
KWD 4
Thermal Grizzly Minus Pad Basic – 2-Pack Thermal Interface Pad, 100x100x2.0mm, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics
KWD 9.500
Thermal Grizzly Conductonaut Extreme Thermal Paste (1g), TG-Shield and TG-Remove 10mL
KWD 26
