Use Edge Banding and Flush Trim bits together to add an attractive edge to cabinet doors and shelving. After gluing up the interlocking plywood and wood edge piece made by the Matched Edge Banding set, trim the edges with the Flush Trim bit. A strong joint and inexpensive solution! Included Edge Banding Set adds an attractive & durable edge to your cabinet doors and shelf edges. For use with plywood panels, MDF panels or shelves from 1/2" to 1" thick. Matched 2 piece bit set is two-flute, carbide-tipped. Simply center the male cutter on the stock and make the cut. Next match up the female cutter with the center point of the first cut. Finish by gluing together the two pieces and flush trim the edges, if necessary. 60° bit feature a tongue & groove for a larger glue surface area and easier alignment of edge banding. Recommended for use in a table mounted router. 1-7/16" Large Diameter, 1" Carbide Height. 1/2" Shank. Included Flush Trim Bit is THE bit to use for laminate trimming. 2-flute, carbide-tipped with totally enclosed ball bearing guides. For use in trimming laminates and pattern routing. 1/2" Large Diameter, 1-3/16" Cutting Length. 1/2" Shank.