This wall mount provides 45 degrees of tilt, enabling your camera to tilt down far enough to glimpse the space directly below the mounting position. With one or two screws you can mount the camera to a wall and see the entire floor space below. It can also be reversed for upward tilt, or turned to any position left or right.
This mount is compatible with the following Unifi cameras:
G3 Instant (full downward and upward view)
G4 Instant (full downward and upward view)
G6 Instant (full downward and upward view)
G3 Flex (almost full downward and upward view due to narrower field of view on this camera)
G5 Flex (full downward and upward view)
"Full downward view" means that the vertical field of view will glimpse the point directly beneath the camera when mounted on a plumb wall - it does not mean that the lens can be pointed directly downwards.
This mount must be used in concert with the mounting base that comes with the camera. Several stainless steel screws are included for attaching the mounting base and for attaching the plastic angle mount to the wall. Various screw sizes and lengths are included to satisfy different mounting situations. Wall anchors are also included though we encourage you to find a stud when possible. Smaller screws are included for sheet metal or direct mounting to wood.
These are 3D printed ASA parts which we make in-house (so you can expect some small aesthetic imperfections). ASA is an outdoor plastic with excellent weather and UV resistance (unlike many other plastics being used for 3D printing). ASA also accepts paint nicely (use a spray paint primer first).