Model: Cinelog35 V2 Analog
Frame: GEP-CL35 V2
Wheelbase: 142mm
Plate: 2.0mm
Plate: 3.5mm
Bottom Plate: 1.5mm
FC system:GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: RAD 1W(UFL)
Camera: Caddx Ratel2
: Peano 5.8 RHCP UFL
Motor: SPEEDX2 2105.5 2650KV (6S)
: D-T90MM
CineLog35 V2 Analog TBSNanoRX weight: 263.8g
Receiver: PNP, ELRS2.4G, TBS Nano
Recommended :LiPo 1050mah-1300mah
Flight time:5′00″ -8′ 30″Includes1 x Cinelog35 V2 Analog2 x D-T90MM(2 pairs)2x M20*250mm strap2 x Pads1 x Set of screws1 x L-shaped screwdriver (1.5mm)1 x L-shaped screwdriver (2mm)1 x L-shaped screwdriver (3mm)1 x M5 wrench1 x plastic tweezers1 x fixed tube (pair)1 x Keychain1 x Naked fixed Base1 x Naked fixed Base1 x fixed BaseScrew package includes:2x cup head screws M2*182x round head screws with pad M2*5.51x round head screws M2*122x nut M24x round head screws M2*84x round head screws M2*74x round head screws M2*62x round head screws M2.5*62x hexagonal screw M1.6*81x Flange nuts M52x Press Nuts_Brass color M2*1.9-OD4.92x Iron nut M22x Iron nut M22x Camera lens shock absorbing rubber