Detail
● Standard Connector: It is suitable for a wide range of photographic equipment such as LED panel lights, spotlights, and flashes. It is also replaceable for more lamps.
● Sturdy Pulley: It can keep the rest wire in order, keep the wire moving smoothly, and support the wire as it pulls on your lamp.

How to Install
● Drill holes in the ceiling according to the pre-drilled holes on the base plate.
● Remove the nuts and insert the bolts into the punched holes.
● Fix the bolts and tighten the nuts to install the base plate. Install the wire-fixing clip.
● Insert the press-type safety device into the base by pressing it by hand and fixing it with bolts.
● Press and hold the press-type safety head to connect the switch head.
● By pressing the key at the end of the precise shaft core, it can be pulled to a suitable position.

Specification
● Material: Aluminum, Iron, ABS
● Process: Spraying Plastics
● Load Bearing Capacity: 10kg/22lbs
● Steel Wire Diameter: 2mm/0.079in
● Mount Type: Ceiling Mounted
● Assembly Required: No
● Product Height: 55-200cm/21.7-78.7in
● Base Size: 12.8x8.8cm/5x3.5in
● Packaging Size: 40x37x11.5cm/15.75x14.57x4.53in
● Gross Weight: 5kg/11lbs
● Net Weight: 4kg/8.82lbs

Package Included
● 1 x Photography Ceiling Rail
● Other Needed Accessories

Note
● Please check the size carefully before ordering.
● Please note that lights are not included.
● It is normal that the expansion screw will blow up after the force is applied.