Description
Set A: Battery Sticker
Precise cutting, anti slip and anti-wear.

Set B: Panoramic Camera Expansion Top Mount
Features:
1. This product is made of friendly plastic, and the part that fits with the body is attached with sponge protection.
2. This product supports a variety of camera mounting methods, can be mounted on the top or bottom.
3. This product with 1/4 screw connection, support panoramic camera and sports camera with 1/4 screw hole.

Single Handheld / Dual Handheld
The bottom of the reserved 1/4 tripod interface, can be adapted to a variety of tripods.

Remote Control Sticker-Black

Warm tips: this product must be handheld takeoff and landing or find a hollow frame in the middle as a takeoff and landing support, be sure to turn off the downward-looking obstacle avoidance before operation!

Note:
1. The mount is a niche product, not recommended for novice users.
2. The product belongs to the 3D printing customized products, installation need to pay attention to the location, the screws need to be tightened (loose will produce resonance shaking), but can not be too tight (too tight will blow up), the storage and use of the temperature of -10 ~ 40 degrees Celsius, don't put in the car to store in the summer, more than 60 degrees is easy to lead to deformation.
3. As each camera and operation is different, please flight must first short rod, low altitude test good stability.