Torque Multiplier Wrench Lug, Lifting Cranes, Material Handling Tools

Introduction:
This car saving wrench is for wheel wrench of small vehicle. It is designed for a car's wheel wrench for easy loosening of truck tires. Lug nuts or car tires by using less energy to reach a sufficient output torque without impact or Compressor needed. When your normal wrench is not able to do the job on some stuck lug nuts, you really need to ramp up your torque! The purpose here is to give extra leverage on tight bolts where a conventional tool is not going to give you the power you need to loosen them.

Instructions:
1. Install the wind gun sleeve into the square end of the shank and the other end of the rocker.
2. The wind gun sleeve is placed on the nut to be disassembled (fastened), pay attention to the elastic direction, and shake the rocker to make the handle against the side of the other bolt.
3. When the nut is loosened, replace it with the extension rod for quick disassembly. After tightening, fasten it with the extension rod first, and then use a labor-saving wrench to lock it.
4. The maximum safety output torque 3200N.M, which is equivalent to 320KG F.M Maximum output torque required for normal disassembly (tightening) nut 3200N.M
5. It takes about 6 minutes to disassemble (tighten) a tire.