Application:
It is suitable for renovators or people with high DIY ability to use it to easily sand plaster walls,putty walls,white cement walls,etc.
How to Use:
Commissioning Machine:
1. Link the machine according to the manual, plug in the power supply, and commission the machine
2. Determine the hardness and softness of the wall putty, decide which type of sandpaper to use, and choose the speed of the machine.

Sanding Operation:
1. Sanding personnel are required to put the grinding disc to the wall first, and then work on the machine.
2. When sanding the upper part of the wall, operate the machine with up and down W-shaped movement. When using the W-shape working method, pay attention to maintaining an even speed when moving up and down, and not to pause when turning, which will cause sand marks on the wall.
3.When sanding the lower part of the wall, operate the machine to move up and down sideways.
4. Sand the top of the wall choosing the shoulder type. In the process of sanding the top, pay attention to keeping the balance of the grinding disc when moving under the feet.
5. Sanding should be done in order to avoid missing.
6. When sanding, you should always pay attention to the working condition of the machine and find problems to solve in time.
7. Clean up the vacuum-cleaner once every time you sand 323ft² and pour off the accumulated du-st.
8. Master the sanding skills, encounter very uneven walls, repeatedly sand several times, special vulgar places need manual processing, so as to avoid machine sanding appearing through the bottom phenomenon.
9. Sanding Yang corner grinding disc can not exceed the wall 3-5CM, to avoid exceeding too much to lead to grinding disc tilt, break the corner.
10. While sanding, please do not force against the grinding disk on the wall for a long time work.
11. Clean up the sanding machine and organize other supporting facilities at the end of the day.

Specifications:
Voltage: 110V
Frequency: 60Hz
Rated Power: 1200W
No-Load Speed: 1200-2500r/min
Dia. of Grinding Disc: 180mm/7in
Sandpaper: 180mm/7in
Number of Sandpapers: 6
Plug: US Standard
Material: Engineering Plastic
Power Source: Corded Electric
Color: ‎Red and Black
Light: LED Strip
Power Type: Plug-in Power Supply
Type: Portable Polishing Machine
Working Principle: Disc Polisher
Power Cord Length: 2.5m/98.4in
Dust Collection Tube Length: 2m/78.7in
Auxiliary Handle Length: 12cm/4.72in
Gross Weight: 5.4kg/11.9 lbs
Net Weight: 5kg/11 lbs
Product Size: 23.3*25*30cm/9.17*9.84*11.81in
Package Size: 36*28*28cm/14.1*11*11in

Package Included:
1*Sanding Machine
2*Carbon Brushes
1*Du-st Collection Tube
1*Du-st Collection Bag
6*Sandpapers
1*Allen Wrench
1*Auxiliary Handle
1*English Manual
Other Accessories for Assembly
Notes:
1.Beware of electrical safety hazards, please use such tools in accordance with product instructions and take the necessary personal protective measures, and place them out of the reach of children on a daily basis.
2. When sanding high walls, if an accidental drop causes the dust tube to disconnect from the black connecting clasp, simply insert the black connecting clasp into the telescopic tube first, then tighten the dust tube clockwise to the inside of the connecting clasp until it cannot be tightened.
3. Please note that this product does not support the additional installation of extension handles or folding handles.