Tired of inefficient manual sanding? Our pneumatic sander revolutionizes exterior preparation with 12000RPM performance. The aluminum alloy body stays cool during 8-hour shifts at auto body shops, while the ergonomic design reduces operator fatigue by 30% versus competitors. From restoring classic car paint to preparing hardwood floors, its stepless speed control handles 80-grit oxidation treatment and 2000-grit finishing equally well. Includes OSHA-compliant protective accessories - just connect to your existing pneumatic compressor (oil/humidity separator required) for industrial results without electric tool hazards.

Item Type: Pneumatic Sander
Material: Aluminum Alloy
Non Load Speed: 12000rpm
Pneumatic Consumption: 0.34m³/min
Chassis Thread Interface: M8
Chassis Diameter: Approx. 125mm / 4.92in (There is a ±2mm error in manual measurement)
Use Scenarios: for Car Beauty, Wood Polishing, Oxidation Treatment, Sheet Metal Polishing

Package List：
1 x Pneumatic Grinder
1 x Base
1 x Special Wrench

Note:
1. Pure and dry compressed pneumatic is necessary. Please clear the oil and humidity from the pneumatic compressor.
2. Method of clearing oil and water from pneumatic compressor: Particle separator can be installed
3. The appropriate pneumatic pressure is 6‑8kg/cm. If the pneumatic pressure is too high, will shorten the service life and cause malfunctions.
4.Please note that the plush tray color of this product will be sent randomly, please make sure you don't mind before ordering.