Installation requires no tools or adhesives: measure the window, adding one inch to each side for trimming. Clean the glass thoroughly, peel off the protective liner, then generously spray soapy water onto both the glass and film. Position the film, use a squeegee or hard card to push out air bubbles and excess water, and trim any overhang with a sharp knife.

Ideal for rental properties, the non-adhesive design peels off without residue and can be reapplied elsewhere. Transform bathrooms, bedrooms, living rooms, or offices with stylish, functional privacy—no heavy curtains or blinds required.

Materials & Dimensions: Crafted from static-cling vinyl; measures 19.69 × 118.11 inches.

Privacy & Light: Provides 24-hour privacy while allowing ample natural light to filter through.

Sun & Heat Management: Filters intense sun rays and reduces glare to protect interiors; insulates against temperature extremes.

Usage: Apply to any flat, smooth glass surface (bathroom, kitchen, cabinet, office, hotel). Not suitable for double-paned, cut, frosted, or textured glass.

Installation Steps:

Measure glass and add 1 inch per side for trimming.

Clean glass thoroughly, especially corners.

Peel off protective backing liner.

Spray plenty of soapy water on both glass and film.

Position film, then squeegee from center outward to remove water and bubbles.

Trim excess with a sharp razor or knife.

Maintenance Tips: Use ample water during installation. Leave a 1–2 cm gap from the window frame to avoid trapped moisture. Remove backing liner carefully to prevent peeling.

Packaging Contents:

1 × Roll of Frosted Vinyl Film (19.69 × 118.11 inches)