Spec:
Item Type: Voltage Reducer
Material: Organic gel and aluminium
Input Voltage Range: DC 20V 60V
Output Voltage: 5V
Rated Output Current: 8A
Output Power: 40W
Protection Grade: IP67
Conversion Efficiency: Up to 96%
Operating Temperature: 20℃ + 80℃
Installation Line Length: Approx. 13cm/5.1in

Package List：
1 x Voltage Reducer
Note：All data are measured manually and there is some error in the measurements.Monitors are calibrated differently, the colours shown in the photos may be slightly different from the real thing. Please refer to the real object.
No.1: In order to ensure the normal Manipulate of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use, and the input voltage value must be higher than the output voltage value by more than 2V, if there is no 2v differential pressure , The output value will become low, but it will not damage (affect) the use of the converter.
No.2: The input current must be greater than or equal to the power required by the output load device (for example, if the power of the load device needs 100w, then the input power must be greater than or equal to 100w). When the converter is in use, the current of the load device should not be greater than the maximum current value that the converter can withstand, and leave as much margin as possible for the converter to ensure that the converter works normally and achieves the highest conversion efficiency.
NO.3: The positive and negative poles of the converter cannot be reversed during use. Reversed connection may cause damage to the converter. It is recommended to add a suitable Safety Device to the input during use.
No.4: The chip works in light load mode when there is no load, and the output voltage may vary within a certain range.