Product Fitment Information:
Compatible With
Bu-ick
2009-2011 Lucerne [For 3.9L V6]
2006-2007 Terraza [For 3.9L V6]
Chevy
2007-2009 Equinox [For 3.4L V6]
2006-2011 Impala [For 3.5L V6]
2006-2011 Impala [For 3.9L V6]
2007-2010 Malibu [For 3.5L V6]
2006-2007 Malibu [For 3.9L V6]
2006-2007 Monte Carlo [For 3.5L V6]
2006-2006 Monte Carlo [For 3.9L V6]
2006-2009 Uplander [For 3.9L V6]
Pontiac
2006-2009 G6 [For 3.9L V6]
2007-2010 G6 [For 3.5L V6]
2006-2009 Montana [For 3.9L V6]
2007-2009 Torrent [For 3.4L V6]
Saturn
2007-2008 Aura [For 3.5L V6]
2006-2007 Relay [For 3.9L V6]
2008-2010 Vue [For 3.5L V6]
Package Includes:
1 x Electronic Throttle Body Assembly - TB1010 (12-Month Warranty)
Part Specifications
Connector:6 Pin Male
Inside Diameter:2-13/16 In. (72 mm)
Throttle Body Installation Notes
After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.
This is because the newly installed throttle body parameters are inconsistent with the original.
Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.
When the computer cannot match, you can use the following manual method to match
1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute
The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1 ~ 2 days of self-learning.