Clutch Throttle Cable Lubricator:
- Material: Aluminum Alloy
- Color: Blue Motorcycle Throttle Cable:
- Length: About 190cm/74.8inch
- Travel: About 75mm
- Color: Blue
- Main Materials: Rubber, Steel, and Iron
Steel Wire Diameter: About 1.3mm
Cable Outer Diameter: About 5mm
Adjuster Thread: 10mm

Place of Application:
- Clutch throttle cable lubricator fit for motorcycles, ATV, bike, scooter, truck, dirt bike, boat
- Motorcycle Throttle Cable fit for HONDA Yamaha Keihin and fit for PWK OKO DIO JOG PE.

Note:
- Don't tighten the accelerator cable too much. If it is too tight, it will increase the idle speed of the car. If it is serious, it will make the car run out without fuel.

Features:

- The package includes a throttle cable with a length of 190cm/74.8inch and a throttle clutch throttle cable lubricator, suitable for most motorcycle ATV modifications and maintenance.
- When the throttle line is deformed or lengthened, it can be replaced with this product if it cannot be adjusted or has no change after adjustment. If the throttle cable is not lubricated regularly, the metal cable will rust, which will cause the cable to be insensitive. This clutch and throttle cable lubricator can help you solve this problem.
- The main materials of the control cable are rubber, steel and iron, and built-in protective PVC stop small dirt particles. Good performance, can better control the throttle open and close. The lubricators are constructed of aluminum alloy material, their tough and sturdy advantages ensure that you can use them for a long time.
- The motorcycle cable wire is held and covered firmly by a foam sponge inside the dual oiler cable lube tool, two screw vise design, convenient for you to control the cable tightly; The vibrant yellow and blue colors look eye catching and adorable, giving you a good and comfortable visual feeling.
- Simple to use, it is easy to use this vehicle cable lubricator to add the lubricant fluid into the cable housing: Firstly you need to loose the 2 screws, then please put the straw of the lubricant into the hole and press the lubricant after tighten up the 2 screws, finally gently press and release the lubricant few times, the fluid will penetrate the whole cable and will make the clutch acts smoothly.

Package Include:
1 x 190cm Throttle Cable
1 x Clutch Throttle Cable Lubricator