XTD 6 puck MIBA Copper Ceramic clutch is designed for the serious enthusiast with just Stock to considerable modifications. This disc features 12 high-coefficient ceramic pads for quick engagement and the extreme duty friction needed. The sprung retainer assembly boasts 6 dual springs and 6 severe duty retainer rivets, ensuring power and reliability.This XTD Stage 3 Clutch Kit Includes XTD High Clamp Long Life Pressure plate,XTD inchMIBAinch 6 Puck Copper Ceramic Disc,Throw out Bearing, pilot bearing,Alignment Tool,9Lbs Chrome-moly flywheel,XTD Clutch Installation Guide & XTD Logo Window Decal.This XTD Pressure plate Holds 30 Percent more HP and Torque Than Stock Pressure Plate and This Pressure plate is made from ductile iron and heat Treated Which is about 20 Percent Stronger Than Just Stock Cast Iron Pressure plate. XTD Stage 3 Copper Ceramic Disc is designed for Ultra Racing Purpose and it Graps much harder than Carbontic or Kevlar disc also It will Increased Acceleration. XTD could achieve manufacturing its original flywheels about 200 Percent more strength compared with normal flywheels. It was forged using Chrome-molybdenum steel. The power of inertia rotation can be decreased by reducing the excess weight, and therefore, its strength directly passed through to the high response.

XTD Flywheels are made using the highest quality, most modern materials available (Flywheel weight:9LBS). XTD could achieve manufacturing its original flywheels about 200% more strength compared with normal flywheels. It was forged using Chrome-molybdenum steel. The power of inertia rotation can be decreased by reducing the excess weight, and therefore, its strength directly passed through to the high response. The XTD light weight flywheel is made from the optimal weight and optimal form which were set up for each type of a car from the chrome forge material. By shaving all circumference of the chrome forge material, the variation in weight and the deviation of balance are pressed down to the minimum. Processing for raising wear durability and heat treatment etc... is performed in the surface. Various know-how for realizing lightness, strength, and high balance is condensed to the XTD light weight flywheel. If a flywheel is made light, it is said that an engine response improves. In case of revolving thing like a flywheel, the power (inertia power) which is always going to continue fixed rotation occurs. When an accelerator is stepped on in from an idling state, a flywheel tends to keep an idling state according to its inertia power, although engine is going to raise rotations. When inertia power becomes large, much time is needed for going up rotation. In the case of the XTD lightweight flywheel, since weight (especially flywheel perimeter part) is light, there is little inertia power of influencing rotation of engine. Since time to go up rotation is shortened, the response of engine to a accelerator becomes quick (a response improves)

✔Application of XTD Clutch Kit
Compatible With: 1992 - 2005 Honda Civic (1.5L, 1.6L, 1.7L SOHC 4cyl D15, D16, D17)
Compatible With: 1993 - 1995 Honda Civic Del Sol (1.5L, 1.6L SOHC 4cyl D15, D16)

✔XTD CLUTCH KIT INCLUDES
XTD HD RACING PRESSURE PLATE
XTD STAGE 3 MIBA CERAMIC 6 PUCK RACING DISC
THROW OUT BEARING
PILOT BEARING
ALIGNMENT TOOL
XTD 9LBS CHROME-MOLY FLYWHEEL
XTD CLUTCH INSTALLATION GUIDE
WINDOW DECAL STICKER