INSTALLATION TIPS
1. After cleaning the surface , spray some water on the adhesive surface and the position you want to stick.
2. After removing the bottom paper of the label, spray more water on the side of the label with glue to reduce the viscosity, which is easy to adjust the position and remove bubbles.
3. After the sticker is pasted on the body, lift one side of the sticker and. scrape it slowly from the other side with a card. At the same time, scrape the bubbles and adjust the position of the sticker until the whole sticker is scraped off.
4. After scraping the bubbles, wait for the water in the sticker to dry before removing the transfer film.
5. The extra stickers at the door and the seam can be cut off with a knife.

SPECIFICATIONS:
Material: Vinyl sticker / PVC material.
Size:49x8.7inch (style A and C )50.8"x 9.5" (style b) .
Color: Black / Red/ White.
Package includes:1 * Hood sticker.
ATTENTION
-Please keep it dry in 24 hours before stick
-Do not use sticker when the car is hot.
- Do not wax the car 7days before using the sticker. The wax will make the sticker not sticky.
-Please let the surface clean and dry first before applying this
-If the sticker needs to be attached to the door seam or other places where it needs to be moved, just stick it and cut it with a knife.
-Gently scrape the edges of the sticker with your fingernails and tear it off. In winter, you can use a hair dryer to remove the stickers after heating

Note:
1. Due to manual measurement, please allow a deviation of 1-3 mm.
2. If you have any questions about the product, please contact us by email. We will reply within 24 hours.