TH350 Stainless Braided Flexible Transmission Dipstick

Item Specification:
Total Length: 29.58 Inches
End Length: 3.18 Inches

Item Features:
1. Easy to install.
2. Stainless steel braided shell to avoid leaks.
3. Machining billet aluminum handle, sturdy and reliable in use.
4. Provide accurate reading.

How to Check Transmission Fluid?
Park on a level surface and open your car's hood. Find the transmission fluid dipstick somewhere near the firewall between the engine compartment and the passenger compartment. (Refer to your owner's manual to double-check whether it has a transmission dipstick.) Leave the hood up.
1. Get into the car and start the engine. Set the parking brake. (Some automatic transmission fluid levels are checked with the engine off. Check your owner's manual.)
2. Slowly move through the gears — park, reverse, drive and low in an automatic transmission — and return to park.
3. Carefully remove the transmission dipstick, wipe it with a clean rag and put it back into the dipstick tube.
4. Remove the transmission dipstick again to see where the transmission fluid level is. The dipstick may have two ""full"" lines, one for warm fluid and one for cold. If your car has only been running a minute or two, it's cold.
5. If the fluid level is low, use a funnel to add more transmission fluid.
6. Replace the transmission dipstick and turn off the car.