Name: Sunshade suction cup
Material: PVC
Color: Black
Pull ring diameter: 14mm/0.55 inch
Suction cup diameter: 45mm/1.8"

The package contains:
Black sunshade suction cup x 20

Features:

1. Places that can be installed (glossy surface) - plastic decorative surfaces such as tiles, stainless steel, metal paint, transparent glass, and combined bathrooms that are larger than suction cups

2. Installation method: dry the wall with a clean soft cloth. The suction cups are washed and wiped dry before use. Hang the hook surface on the wall, press firmly on the center part of the suction cup, and rub around the perimeter to remove air

3. Note: The surface of the suction cup will not cause damage to the wall, easy to install and easy to disassemble, but because it is a vacuum force installation device, air enters and falls off easily. To maintain suction, follow the instructions below for use.

(1) When the wall surface and suction cups are contaminated and dusty, they are easy to fall off, so please clean them up.

(2) If the suction cup is easy to slide, apply a small amount of pair (salad oil, etc.) to the inner surface of the suction cup, and the oil film has the effect of making air and water not easy to enter.

(3) Fallen suction cups and old suction cups are often not easy to suck firmly. Pour boiling water into a bowl, soak the suction cups for only 5-6 minutes, and let dry before use.

(4) Do not hang valuables such as clocks, cameras, and mirrors on hooks.

Note:
1. Due to manual measurement, please allow 1-2mm error, please don't mind.
2. Please note that the color may vary slightly depending on the monitor.
3. Places that cannot be installed (uneven, rough, sandy surface) wooden walls, stucco walls, concrete walls, stained glass, frosted glass, etc.