When your car runs out of battery power outdoors and won't start, there's no need to wait for rescue or towing services, simply connect the jumper cables to the Milwaukee M18 18V Battery Starter to quickly and safely start a vehicle with a drained battery so you can keep driving.
Our adapter boxes and clamp grips are made of sturdy and durable ABS plastic material, the cores are made of forged from pure copper with excellent conductivity, and the outer layer of the cable is made of insulating material, which greatly increases safety and durability, allowing you to use it with greater peace of mind.
Product wire is 8-AWG, wire length: 5.74FT, temperature resistance: 200℃, compatible with Milwaukee M18 18V battery, and suitable for most 12V small and medium-sized cars, motorcycles, off-road vehicles.
Usage steps:1.Connect the red clamp to the vehicle battery's positive terminal (+) and the black clamp to the negative terminal (-),2.Insert the battery into the adapter and ensure it is securely locked,3.Wait for 2 minutes, then attempt to start the vehicle, limiting ignition attempts to no more than 3 seconds,4.If unsuccessful, do not immediately retry. Wait for 3 minutes.then try again,5.Once the vehicle starts, disconnect the clamps within 30 seconds,6.Remove the battery from the adapter and store both in acool, dry place.
Precautions:1.Emergency jump-starting a vehicle carries risks; wearinsulated gloves and safety goggles during operation,2.Ensure the battery is fully charged and in good condition,3.After inserting the battery into the adapter, avoid contact between the positive and negative metal clamps to prevent short circuits,4.Disconnect the clamps within 30 seconds after starting the vehicle, and separate the battery from the adapter forstorage,5.If multiple attempts to start the vehicle are unsuccessful.check for other electrical issues.
Our Jumper Cable Clamps are designed to be compact, lightweight, and can be stored in your car, taking up little space and making them easy to carry around for emergencies.
Attention:This jumper cables does not convert or reduce voltage, It simply provides an additional option for starting the car in emergency situations.
We have good after-sales service,any product problems or suggestions,please feel free to contact us by email,we will respond in time to ensure that the problem is solved efficiently,and your comments will also help us to build a more perfect product!
AC Blower Motor with Fan Fits for 1996-2013 Chevy Express GMC Savana HVAC Heater Blower Motor Replaces# 700067
KWD 16
604-239 HVAC Blend Door Actuator Replacement for 7T4Z19E616B Compatible with Ford Edge 2007-2014 Lincoln MKX 2007-2015 Heater Left Main Temperature
KWD 7
Front Right Side Steering Knuckle with Ball Joint Fit for Chrysler 300 2012-2021, for Dodge Challenger 2012-2021, for Dodge Charger 2012-2021, Drop Spindles Lowering Kit Replace for 698-298
KWD 37.500
4 Pcs White Clutch Pedal Stop Pad Clutch Pedal Stop Pad 46505-SA5-000 46505SA5000 for Acura-Civic Brake Pedal Limit Block Brake Limiter Pad Pedals and Pedal Accessories
KWD 2.500
