No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.
Simply slide this tool onto the crank, insert key and the proper size bolt through the 3/8" square hole and into the sidecover. This will lock the crank. The 3/8" square hole allows you to use a ratchet or breaker bar to hold the crank for engines without the threaded holes in the sidecover.
Made from heavy 304 stainless steel with an aluminium hub. Assembly required. The product in the package is shown as the picture
The 3/4" hub can also be changed out for a 5/8" hub to hold 5/8" cranks or jackshafts
Please use screws to fix the square holes on the box, it is better not to use a ratchet.
Locking Pliers Slide Hammer Puller Set, 9.8 in Locking Pliers 2 lb Slide Hammer with Quick Release Swivel Connector, Vise Grip Slide Hammer for Nail Bolt Pin Seal CV Axle Removal Tool
KWD 18
-8%
New Lower Control Arm Prying Tool Kit,1/2"Suspension Specialty Bushing Tool and Pry Bar Wrench Adaptor Head,Mainly for Control Arm and Suspension Removal,Suitable for Most Front-wheel Drive Vehicles
KWD 11.500
ROTATION 4-Piece Heavy-Duty Long Hook & Pick Set, Automotive Hose Removal Tools for Vehicle Radiator and Coolant Hose, Clamp, and More
KWD 12.500
HONGSEN Low Loss Fittings HVAC Tools,HS-1221, Mini Split Air Conditioner Manifold, Refrigerant Charging Valve Compatible with R410A Refrigerant
KWD 4
