This dramatically different premium grade glazing compound was designed using the very highest quality of ultra-fine micro abrasives to achieve world-class results. These precision abrasives with numerous exterior facets and extremely sharp edges are the critical elements for the safe removal of oxidation, heavy water spots, surface contaminants, stains, and light surface scratches. DRIVEN Finish Restorer simultaneously feeds the finish with a full spectrum of essential polymers and oils resulting in a phenomenal shine. This unique combination of safe cleaning and nourishing is sure to bring out the very best in your finish.

Directions for use:
1. Wash and dry the surface before restoring. A shade application is preferable. Shake the bottle well. By hand, rub in aggressively with a soft damp microfiber cloth or damp foam pad one section at a time. Follow up by buffing aggressively to a high gloss with another soft microfiber cloth. Repeat if necessary to remove any remaining oxidation, heavy water spots, or contaminants.
2. For heavier oxidation, heavy water spots, and light surface scratches, use an electric buffer (rotary or dual action) and lamb's wool cutting pad or hard foam compounding pad for exceptional results. Keep the pad lubricated with just a light mist of water from a spray bottle while compounding.
3. Follow up this application by sealing and protecting the finish with DRIVEN Automotive Polish & Sealant or DRIVEN Marine Polish & Sealant. DRIVEN Finish Restorer is also exceptional at buffing out finishes that have been wet sanded with 2000 grit or higher wet/dry sandpaper. This technique of wet sanding and electric buffing should only be used in cases of extreme oxidation, deeply etched blemishes, and heavier scratches. For this procedure, always test a very small inconspicuous area first.