BRAKE PEDAL MOD NEW-GEN FOR THRUSTMASTER T248 / T3PM This Brake MOD increases the realism and performance of the Thrustmaster T248 / T3PM pedal set. It completely improves the way you brake! Whether you are braking hard or lightly, the original spring will always apply the same force to your foot. Thanks to our Brake MOD, the brake pedal will become similar to that of a real car: the more pressure you put on the pedal, to obtain more intense braking, the harder it will become. This effect helps you a lot during long racing sessions, when your leg loses much of its sensitivity and during the most difficult braking you can no longer dose the pedal well. You will avoid locking the wheels. The graphic feedback highlights how our MOD guarantees a wider range of use, reduces the surreal dead zone reproduced by the T3PM pedal set, and corrects the ramp of the curve. Brake Mod: from linear to progressive Linear: characteristic of covered-wheel cars (GT, Rally, Drift). Progressive: characteristic of slim, light and high-performance cars (Formula, LMP). The Material The Thrustmaster T3PM brake mods are made with a special elastomer, with shape memory. Note: after installing the MOD, you must reset the peripherals by disconnecting both the USB cable and the power supply. If you want to make the MOD less hard, just cut the elastomer by 5mm from the bottom side.