How to use the tools :

1. Clean Dent surface with a clean wet cloth
2. Connect the power supply of the gun and put the glue stick to gun, heating for 5-10 minutes;
3. Press the trigger and apply the suitable Tabs with extruded glue (Note: The larger the Glue Tabs, the larger the drawing force)
4. Place the Glue Tabs in the center of the dent and hold for about 5-8 minutes. The Cooling time should not exceed 10 minutes, should be slightly shorter in winter.
5. Pull the Glue Tabs backwards to pull up the dent
6. Clear the glue by alcohol with plastic shovel when dent was removed.
7. If the dent is not completely removed, knock it slightly with a flattening hammer and Tap down pen
8 .Repeat the above steps until the dents are completely removed.
Note: If you don't know how to use tool, please contact us, we will send the video to you.