BC Battery Controller offers a range of latest generation battery chargers/maintainers, the only one 100% Made in Italy, among the safest and most advanced on the market. It carries out 8 charging cycles completely automatically and can be used for maintaining and recharging batteries used in automotive, motorcycle, scooter, camping, powersport, gardening applications and for "deep-cycle" batteries. In this range we find BC K900 EVO+, a universal battery charger and maintainer with 4 selectable programs (Lead-Acid, Lead-Acid CAN-Bus, Lithium and Lithium CAN-Bus), which thanks to its CAN-Bus program and the adapter included , can be connected directly to the 12V DIN.4165 socket present on all BMW motorbikes regardless of the battery installed on board, in fact with its maximum charging current of 1 Amp is designed for complete maintenance of all types of traditional 12 V batteries (from lead-acid to AGM) and all 12 V lithium batteries, from 1.2Ah up to 100 Ah.Recharges much faster than normal battery chargers, the battery with BC Battery Controller products can last up to 8/10 years, and can repair sulphated batteries, recover 1.25V batteries (lowest level on the market) and is designed to use with vehicles equipped with “micro-hybrid” start/stop systems. Driven by a cutting-edge microcomputer, BC K900 EVO+, in addition to monitoring the safety and efficient charging of the battery, automatically reduces energy consumption to a minimum and guarantees a high level of protection thanks to its spark-proof system (anti-spark). and its protections against overloads, polarity inversions and short circuits. Completely automatic, it can always remain connected to the battery 24 hours a day/7 days a week, therefore for entire months, even for years in a totally safe way, and also thanks to its livery, simple design and its compactness and easy handling, this The product is super light and truly suitable for everyone. Despite its compactness, it is equipped with a very sturdy body that prevents slipping and makes it resistant to scratches, falls, accidental crushing, UV rays and water (IP44).The product is supplied with convenient pliers, practical mounting eyelets to leave on the vehicle and an adapter for cigarette lighter socket and 12V DIN.4165 socket for BMW motorcycles. Thanks to the intuitive LED bar which also guarantees perfect night vision, BC K900 EVO+ provides us with information on the battery charge status and the cycle in progress as well as on the selected program (Lead-Acid, Lead-Acid CAN-Bus, Lithium or Lithium CAN-Bus) . The product is covered by a 3-year warranty and premium assistance directly in the factory, given the very few cases handled. BC K900 EVO+ is the most complete motorcycle battery charger and maintainer on the market, the only one that can be connected directly to the 12V socket of BMW motorcycles regardless of the battery installed on board: it is in fact compatible with all 12V lead-acid batteries and lithium and with the CAN-Bus system. It is possible to choose between 4 charging programs: ""Pb-Acid" and "Lithium", for the recovery, charging, desulfation and maintenance of lead batteries (also gel or sealed) and ultra-light lithium batteries respectively; "Pb-Acid CAN-Bus" and "Lithium CAN-Bus" for direct connection to the standard 12V DIN.4165 socket of BMW motorcycles (the adapter is always included in the package).Changing the program is very simple. BC has preferred to avoid the use of buttons that can break over time and to focus on a software mode for changing programs that is indestructible. With the charger turned off just connect the wiring with the pliers to the charger and hold them together (shorted pliers). When you turn on the charger, completely safely, without the slightest spark, you will see the charger change programs and move on to the next. By turning the charger off and on in this way, it will continue to change the program. Once the desired program has been selected, you can remove the pliers from the short and from now on the battery charger will always remain in the same program, always keeping it in memory even in subsequent uses. CHARGING ALGORITHM - LEAD-ACID CHARGING PROGRAM Phase 1 - Initialization: check that one or more cells are not short-circuited and therefore the battery is in a condition to be recharged/recovered. Phase 2 - Recovery: if the battery is in extreme discharge conditions (starting from 1.25V), the device attempts recovery, to bring it back to higher voltages. Phase 3 - Light Charge: if the battery is significantly discharged, the device delivers a light pulsed current to the battery, to overcome the critical phase. Phase 4 - Main Charge: during this phase the charger delivers full current to the battery, which can recover up to 85-90% of its capacity. Phase 5 - Desulfation / Absorption: in this phase the battery is provided with a "controlled overcharge" capable of restoring the remaining 10-15% of the battery's capacity, through the desulfation/recovery of the lead-acid cells (for mild sulfation levels or average). Phase 6 - Battery Analysis: the device interrupts the power supply for a few tens of minutes and checks that the battery is able to retain the charge received during the previous charging cycles. The test is periodically repeated at regular intervals. Phase 7 - Maintenance: thanks to a specially designed electronic circuit, the device maintains the battery charge during periods of non-use, without overheating, overcharging and loss of water/electrolyte. Phase 8 - Equalization: during long-term maintenance, the device performs an equalization charge every 30 days to rebalance the battery cells, avoiding electrolyte stratification phenomena. PACKAGE CONTENTS -1 BC K900 EVO+ battery charger and charge maintainer -Cable with eyelets (1 for positive and 1 for negative) -Cable with terminals (1 for positive and 1 for negative) -Universal cigarette lighter plug (and removing the red cap becomes with the standard CAN Bus 12V DIN 4165 socket mounted on BMW) - Complete instructions Real-time monitoring of battery parameters during all charging cycles. - Integrated temperature sensor: if a low temperature (